Step 10. Change the control panel
overlay (optional)
If necessary, use the following
procedure to install the appropriate
control panel overlay for your
language.
1 Locate the control panel overlays in
the output bin of the printer. (These
overlays might have moved during
shipping.)
2 If necessary, remove the overlay
currently installed on the printer:
a Open the printer’s top cover.
b Insert a thin, rigid object under the
edge of the overlay, and then pull
up on the overlay until it comes off.
c Close the top cover.
3 Place the desired control panel
overlay onto the control panel and
snap it into place.
20 start guide
ENWW